Cadence PCB实用培训3月9日班火热招生中
- 开课日期:2012-03-09
- 上课时间:自由安排
- 授课学校:中科信软
- 上课地点:北京市海淀区国际关系学院
求学价:面议
求学价:面议
一、培训目标
高速PCB设计的潮流已经滚滚而来,如何预防PCB板上出现的信号反射、串扰、电源/地平面干扰、时序匹配以及电磁兼容性等一系列新问题好象突然间挡在了您的面前。如何应对新的设计挑战?Cadence培训高级班将首先让您了解这些问题产生的机理,并掌握其解决方法;然后讲解并上机练习Cadence的高速 PCB设计与仿真工具SPECCTRAQuest的使用。使您在硬件设计过程中,能够达到“设计即正确”的目的。
二、培训内容:
1 高速PCB设计中的理论基础
传输线理论、信号完整性(反射、串扰、过冲、地弹、振铃等)、电磁兼容性和时序匹配等等。
2 SPECCTRAQuest设计流程
2.1 Pre-Placement
2.2 Board Setup Requirements for Extracting and Applying Topologies
2.3 Database Setup Advisor
—Cross-Section
—DC Nets
—DC Voltages
—Device Setup . ??—SI Models
—SI Audit
3 拓扑结构的抽取与仿真 Extracting and Simulating Topologies
3.1 Pre-Route Extraction Setup—Default Model Selection.
3.2 Pre-Route Extraction Setup—Unrouted Interconnect
3.3 Pre-Route Template Extraction
3.4 SQ Signal Explorer Expert
3.5 Analysis Preferences
3.6 SigWave
3.7 Delay Measurements
4 确定和施加约束 Determining and Adding ConstraintsSolution
4.1 Solution SpaceAnalysis: Step 1 to 6
4.2 Parametric Sweeps.
4.3 Constraints :
Topology Template Constraints
Switch/Settle Constraints
Assigning the Prop Delay Constraints
Impedance Constraint
Relative Propagation Delay Constraint
Diff Pair Constraints
Max Parallel Constraint
Wiring Constraint
User-Defined Constraint
Signal Integrity Constraints
4.4 Usage of Constraints Defined in Topology Template
5 模板应用和基于约束的布局
Template Applications and Constraint-Driven Placement
5.1 Creating a Topology
5.2 Wiring the Topology
5.3 TLines and Trace Models
5.4 Coupled Traces
5.5 RLGC Matrix of Coupled Trace Models
5.6 Crosstalk Simulation in SQ Signal Explorer Expert
5.7 Simulating with Coupled-Trace Models
5.8 Sweep Simulation Results with Coupled-Trace Models
5.9 Extracting a Topology Using the Constraint Manager
5.10 Electrical Constraint Set
5.11 Applying Electrical CSet
5.12 Worksheet Analysis
5.13 Spacing and Physical Rule Sets
5.14 Electrical Rule Set
6 基于约束的布线 Constraint-Driven Routing
6.1 Manual Routing
6.2 Routing with the SPECCTRA Smart Route
6.3 Driving Constraints in Routing
7 布线后的DRC检查和分析 Post-Route DRC and Analysis
7.1 Post-Route Analysis
7.2 SigNoise
7.3 Reflection Simulation
7.4 Reflection Waveform Analysis
7.5 Comprehensive Simulation
7.6 Crosstalk Simulation
7.7 Crosstalk Analysis
7.8 Simultaneous Switching Noise Simulation
7.9 SSN Waveform Analysis
7.10 System-Level Analysis
7.11 A Complete Design Link
7.12 Initialize Design Link
8 差分信号设计 Differential Pair Design Exploration
8.1 Types of Differential Pairs in SPECCTRAQuest
8.2 Create Differential Pair Using SPECCTRAQuest
8.3 Create Differential Pair Using Constraint Manager
8.4 Assigning Differential Pair Signal Models
8.5 Preference to Extract Unrouted Differential Pair Topology
8.6 Extracting Unrouted Differential Pair Topology
8.7 Custom Stimulus to Analyze Differential Pair Topology
8.8 Differential Pair Topology Analysis
8.9 Coupled Trace Model and Differential Pair Topology
8.10 Layout Cross-section Editor
8.11 Differential Pair Constraints
8.12 Differential Pair Constraints in the Constraint Manager
8.13 Differential Pair Analysis in the Constraint Manager
8.14 Post Route Extraction
课程顾问:石老师
咨询热线:010***2
咨询QQ:127***9
咨询手机:132***1
网上预报名
微信扫描二维码,马上联系商家
1、微信扫描二维码
2、关注“求学快递网”公众号
3、点击给商家留言
当您发现本站有涉及个人的侵权内容时,建议您先尝试与当事人沟通解决问题。 如果您无法联系到当事人,您可通过此渠道提交举报诉求。
根据求学快递网侵权举报规范,您需要向我们提交您的个人信息,其中包括身份证明。如您确认已准备齐全,可点击下方按钮进入诉求提交页。
当您发现本站有涉及企业的侵权内容时,建议您先尝试与当事人沟通解决问题。如果您无法联系到当事人,您可通过此渠道提交举报诉求。
根据求学快递网侵权举报规范,您需要向我们提交您企业和个人的证明材料。如您确认已准备齐全,可点击下方按钮进入诉求提交页。
举报成功!
已经收到您的举报信息,我们会尽快核实并处理,感谢您的信任与帮助~