安博亚威-CCNP考试认证
- 开课日期:2012-12-25
- 上课时间:自由安排
- 授课学校:北京亚威中联科技有限公司
- 上课地点:北京市海淀区苏州街29号院18号楼维亚大厦15层
求学价:¥4900
求学价:¥4900
CCNP考试介绍
CCNP(Cisco Certified Network Professional)是在CCNA的基础之上的一项思科职业资格认证,获得CCNP资格的专业人员将具有100到500多个节点的大型企业网络安装、配置和运行LAN、WAN及拔号访问业务的能力;但CCNP资格的取得是必须在取得CCNA资格的前提之上的,这一点与CCIE对考生的资格没有任何要求是不同的,其考试可以选择3门基础考试+1门排错考试或1门综合基础考试+另1门基础考试+1门排错考试这两种方式,其中后者难度较前者大,但是可以省下1门的考试费.
注:考试优惠价仅限于亚威学员!
CCNP考试专区
CCNP新版考试报名--优惠方案1(单科报名)
|
科目 |
考试号 |
课程名 |
优惠价 |
原价 |
有效期 |
|
CCNP |
642***2 |
ROUTE |
1600 |
1700 |
考生申请优惠价格考试,需在3个月内完成,过期作废 |
|
642***3 |
SWITCH |
1600 |
1700 | ||
|
642***2 |
TSHOOT |
1700 |
1700 |
CCNP新版考试报名--优惠方案2(套餐报名)
|
套餐类型 |
考试代码 |
优惠价 |
原价 |
有效期 |
|
CCNP |
642***2 |
4750 |
4900 |
优惠价需在3个月内完成 |
|
642***3 | ||||
|
642***2 |
认证组合1
|
642***2ROUTE |
Implementing Cisco IP Routing (ROUTE) |
|
642***3SWITCH |
|
|
642***5ISCW |
Implementing Cisco IP Routing (ROUTE) |
|
642***5ONT |
Building Cisco Multilayer Switched Networks (BCMSN) |
认证组合2
|
642***1BSCI 考试截止日期为7/31/2010 |
Building Scalable Cisco Internetworks (BSCI) |
|
642***2BCMSN |
Building Cisco Multilayer Switched Networks (BCMSN) |
|
642***2TSHOOT |
|
认证组合3
|
642***2Composite 考试截止日期为7/31/2010 |
Building Scalable Cisco Internetworks (BSCI) |
|
642***2TSHOOT |
认证组合4
642***2Composite 考试截止日期为7/31/2010 |
Building Scalable Cisco Internetworks (BSCI) |
|
643***2TSHOOT BETA |
Troubleshooting and Maintaining Cisco IP Networks (TSHOOT) |
|
OR |
|
|
642***2TSHOOT |
|
CCNP考试报名流程
CCNP考试注册是需要有CCNA的证书做为基础的,即考生需要通过CCNA以后才可以参加CCNP的考试!需要考试的考生首先需要选择考试中心,CCNP是一项国际认证,可以在全球的Prometric或VUE考试中心考试.
选定考场以后,考生可以直接与考试中心联系注册考试,考试通过以后到思科网站上进行注册,注册地址:https://,签定协议以后一个月左右即可收到从美国思科总部邮寄的CCNP证书!
CCNP考试内容:
CCNP642***1BSCI:(变化程度:20%)<变为BSCI642***1>
| 1、 | 增加IPv6 的概念. |
| 2、 | 新增RIP v2.该考点以前为CCIE认证的知识范畴,现在调整到BSCI课程,RIP v1的内容在已经涉及到. |
| 3、 | 增加NAT的概念和配置,NAT转换采用更高级的Route-map控制,增加ODR协议,去掉IGRP协议,EIGRP协议中增加STUB区域,ISIS协议中去掉抽象理论,增加实用配置,BGP中去掉Router Reflector , 增加 IOS版本新技术. |
| 4、 | OSPF保留多区域配置,删除单区域配置,单区域考点在开始考查了. |
| 5、 | 路由性能及优化部分增加了MPLS知识. |
CCNP642***1BCMSN:(变化程度:70%)<变为BCMSN642***2>
| 1、 | IOS采用Native IOS版本,淡化CAT OS和Native IOS的比较和介绍:Cat OS为基于SET命令集,Native IOS 为命令集等同于路由器.(据日考过的网友说,Cat的知识一点没涉及到). |
| 2、 | 交换机标准设备变动较大,更换成:访问层的2950交换机,分布层的3550交换机,核心层的4006以及6500交换机. |
| 3、 | 在VLAN中引入 Trunking(Q in Q). |
| 4、 | 对于多播部分加入了IGMPv3,还加入了Cisco IP Telephony技术. |
| 5、 | 增加STP的内容:包括RSTP和MSTP. |
| 6、 | 采用 HSRP, VRRP, GLBP, SRM, SLB 做 router redundancy. |
| 7、 | 在三层交换机中更加细致的讲述了CEF-Based MLS,增加CISCO私有的多层交换技术:CEF(思科快速转发). |
| 8、 | Cisco引入AVVID架构概念. |
| 9、 | Multilayer Switched Networks 的安全性及优化. |
| 10、 | 增加园区网Qos设计与实现,QoS是BCMSN的重点. |
| 11、 | 增加组播部分内容. |
| 12、 | 对于网络分析功能,介绍SPAN,VSPAN,RSPAN和硬件NAM的配置. |
| 1、 | 取消CISCO700,、Windows 95拨号连接,删掉WIN 95/NT拨号配置. |
| 2、 | 增加Cable Modem内容. |
| 3、 | 增加了DSL技术包括:ADSL,VDSL,SDSL,,IDSL等DSL技术. |
| 4、 | 增加PPPoE, PPPoA协议. |
| 5、 | 增加了VPN内容,包括IPSec和加密技术. |
| 1、 | 增加OSPF以及EIGRP的排错. |
| 2、 | 取消AppleTalk和IPX的排错内容. |
| 3、 | 增加Qos以及组播的排错. |
| 4、 | CIT的新版课程变化很大,除了介绍一些排错理念、排除方法论和排错工具外,还有针对其他三门课程内容的排错,如OSPF, NAT, QoS, ADSL, VPN等.也从以前重点讲述技术转变为重点讲述技术文档的建立、完善和Troubleshooting流程及日志. |
| 5、 | 增加VPN排错. |
旧版CCNP考试内容:
适用认证:CCDP/CCIP/CCNP
考试号:642***1
BSCI变化程度:20%
考点难点:
1.新增Routing Information Protocol Version 2(RIP v2).该考点以前为CCIE认证的知识范畴,现在调整到BSCI课程,RIP v1的内容在已经涉及到了.
保留多区域配置,删除单区域配置,单区域考点在开始考查了.
3.路由性能及优化部分增加了MPLS知识4.增加IPv6 的概念5.增加NAT的概念和配置
Technology
• List the key information routers needs to route data
• Describe classful and classless routing protocols
• Describe link-state router protocol operation
• Compare classful and classless routing protocols
• Compare distance vector and link state routing protocols
• Describe concepts relating to extending IP addresses and the use of VLSMs to extend IP addresses
• Describe the features and operation of EIGRP
• Describe the features and operation of single area OSPF
• Describe the features and operation of multi-area OSPF
• Explain basic OSI terminology and network layer protocols used in OSI
• Identify similarities and differences between Integrated IS-IS and OSPF
• List the types of IS-IS routers and their role in IS-IS area design
• Describe the hierarchical structure of IS-IS areas
• Describe the concept of establishing adjacencies
• Describe the features and operation of BGP
• Explain how BGP policy-based routing functions within an autonomous system
• Explain the use of redistribution between BGP and Interior Gateway Protocols (IGPs)
Implementation and Configuration
• Given a set of network requirements, identify the steps to configure an Enhanced IGRP environment and verify proper operation (within described guidelines) of your routers
• Given an addressing scheme and other laboratory parameters, identify the steps to configure a single-area OSPF environment and verify proper operation (within described guidelines) of your routers
• Given an addressing scheme and other laboratory parameters, identify the steps to configure a multiple area OSPF environment and verify proper operation (within described guidelines) of your routers
• Given an addressing scheme and other laboratory parameters, identify the steps to configure Cisco routers for proper Integrated IS-IS operation
• Identify the steps to select and configure the different ways to control routing update traffic
• Identify the steps to configure router redistribution in a network
• Identify the steps to configure policy-based routing using route maps
• Given a set of network requirements, identify the steps to configure a BGP environment and verify proper operation (within described guidelines) of your routers
• Identify the steps to configure a router for Network Address Translation with overload, static translations, and route maps.
Design
• Describe the three-layer hierarchical design model and explain the function of each layer: Access, Distribution and Core
• Given specific requirements, choose the correct routing protocol to meet the requirements
• Identify the correct IP addressing scheme, including features of IPv6
• Describe the concepts relating to route summarization and apply them to hypothetical scenarios
Troubleshooting
• Identify the steps to verify OSPF operation in a single area
• Identify the steps to verify OSPF operation in multiple areas
• Identify verification methods which ensure proper operation of Integrated IS-IS on Cisco routers
• Identify the steps to verify route redistribution
• Describe the scalability problems associated with internal BGP
• Interpret the output of various show and debug commands to determine the cause of route selection errors and configuration problems
• Identify the steps to verify Enhanced IGRP operation
适用认证:CCNP
考试号:642***1
BCMSN变化程度:70%
考点难点:
1.交换机标准设备变动大:由于1900和5000交换机已经停产,课程不再涉及到上述产品,设备更换成:访问层的2950交换机,分布层的3550交换机,核心层的4006以及6500交换机.
OS和Native IOS的比较和介绍:Cat OS为基于SET命令集,Native IOS 为命令集等同于路由器.
3.增加STP的内容:包括RSTP和MSTP
4.采用 HSRP, VRRP, GLBP, SRM, SLB 做 router redundancy
5.增加CISCO私有的多层交换技术:CEF(思科快速转发)
6.增加AVVID的架构
7.增加 Tunneling
Switched Networks 的安全性及优化
9.增加园区网Qos设计与实现
10.增加组播部分内容
11.交换机内Switching Database Manager specifically Content Addressable Memory (CAM) 和 Ternary Content Addressable Memory (TCAM) 的功用
Technology
• Describe the Enterprise Composite Model used for designing networks and explain how it addresses enterprise network needs for performance, scalability and availability
• Describe the physical, data-link and network layer technologies used in a switched network, and identify when to use each
• Explain the role of switches in the various modules of the Enterprise Composite Model (Campus Infrastructure, Server Farm, Enterprise Edge, Network Management)
• Explain the function of the Switching Database Manager [specifically Content Addressable Memory (CAM) and Ternary Content Addressable Memory (TCAM)] within a Catalyst switch
• Describe the features and operation of VLANs on a switched network
• Describe the features of the VLAN trunking protocols including , ISL (emphasis on ) and dynmic trunking protocol
• Describe the features and operation of Tunneling () within a service provider network
• Describe the operation and purpose of managed VLAN services
• Describe how VTP versions 1 and 2 operate including domains, modes, advertisements, and pruning
• Explain the operation and purpose of the Spanning-Tree Protocol (STP) on a switched network
• Identify the specific types of Cisco route switch processors, and provide implementation details
• List and describe the operation of the key components required to implement interVLAN routing
• Explain the types of redundancy in a multilayer switched network including hardware and software redundancy
• Explain how IP multicast operates on a multilayer switched network, including PIM, CGMP and IGMP
• Describe the quality issues with voice traffic on a switched data network, including jitter and delay
• Describe the QoS solutions that address voice quality issues
• Describe the features and operation of network analysis modules on Catalyst switches to improve network traffic management
• Describe Transparent LAN Services and how they are implemented in a service provider network
Implementation and Operation
• Convert CatOS to native IOS on Catalyst switches and manage native IOS images according to best practices
• Configure access ports for static and multi-VLAN memebership
• Configure and verify trunks
• Configure and verify ISL trunks
• Configure VTP domains in server, client and transparent modes
• Enable Spanning Tree on ports and VLANs
• Configure Spanning Tree parameters including: port priority, VLAN priority, root bridge, BPDU guard, PortFast and UplinkFast
• Implement IP technology on a switched network with auxiliary VLANs
• Configure and verify router redundancy using HSRP, VRRP, GLBP, SRM, and SLB
• Configure QoS features on multilayer switched networks to provide optimal quality and bandwidth utilization for applications and data
• Configure Fast EtherChannel and Gigabit EtherChannel to increase bandwidth for interswitch connections
Planning and Design
• Compare end-to-end and local VLANs, determine when to use each
• Design a VLAN configuration with VTP to work for a given specific scenario
• Select multilayer switching architectures, given specific multilayer switching needs
• Describe the general design models when implementing IP telephony in a switched network environment
• Plan QoS implementation within a multilayer switched network
Troubleshooting
• Troubleshoot common VLAN problems on a switched network
• Tune and troubleshoot spanning-tree protocol on a multilayer switched network to enhance network performance, prevent network loops, and minimize downtime
• Identify interVLAN routing performance and scalability issues, and propose solutions
• Verify and troubleshoot interVLAN routing on a switched network
• Identify QoS implementation issues at the network access layer
• Identify QoS implementation issues at the network distribution and core layers
适用认证:CCIE/CCNP
考试号:642***1
BCRAN变化程度:40%
考点难点:
1.增加Cable Modem内容
2.增加DSL技术(ADSL)
3.增加PPPOE以及PPPOA协议
4.增加VPN内容
5.取消CISCO700,,Windows 95拨号连接
General Knowledge
• Describe how different WAN technologies can be used to provide remote access to a network, including asynchronous dial-in, Frame Relay, ISDN, cable modem, and DSL
• Describe traffic control methods used to manage traffic flow on WAN links
• Explain the operation of remote network access control methods
• Identify PPP components, and explain the use of PPP as an access and encapsulation method
• Describe the structure and operation of virtual private network technologies
• Describe the process of Network Address Translation (NAT)
Implementation and Operation
• Configure asynchronous modems and router interfaces to provide network access
• Configure an ISDN solution for remote access
• Configure frame relay operation and traffic control on WAN links
• Configure access control to manage and limit remote access
• Configure DSL operation using Cisco IOS
• Configure VPN operation using Cisco IOS
• Configure Network Address Translation (NAT)
Planning and Design
• Design a Cisco remote access solution using asynchronous dial-up technology
• Plan a Cisco ISDN solution for remote access or primary link back-up
• Design a Cisco frame relay infrastructure to provide access between remote network components
• Design a solution of access control to meet required specifications
• Plan traffic shaping to meet required quality of service on access links
Troubleshooting
• Troubleshoot non-functional remote access systems
• Troubleshoot a VPN system
• Troubleshoot traffic control problems on a WAN link
适用认证:CCNP
考试号:642***1
CIT变化程度:50%
考点难点:
1.以前CIT课程跟其他三门科目联系不紧密,现在新版课程除了介绍一些排错理念、排除方法论和排错工具外,还有针对其他三门课程内容的排错,如 OSPF, NAT, QoS, ADSL, VPN等.
2.取消AppleTalk和IPX的排错内容
3.增加OSPF以及EIGRP的排错
4.增加Qos以及组播的排错5.增加VPN排错
Technology
• Identify troubleshooting methods
• Explain documentation standards and the requirements for document control
Implementation and Operation
• Establish an optimal system baseline
• Diagram and document system topology
• Document end system configuration
• Verify connectivity at all layers
• Select an optimal troubleshooting approach
Planning and Design
• Plan a network documentation system
• Plan a baseline monitoring scheme
• Plan an approach to troubleshooting that minimizes system downtime
Troubleshooting
• Use Cisco IOS commands and applications to identify system problems at all layers
• Isolate system problems to one or more specific layers
• Resolve sub-optimal system performance problems at layers 2 through 7
• Resolve local connectivity problems at layer 1
• Restore optimal baseline service
• Work with external providers to resolve service provision problems
• Work with system users to resolve network related end-use problems
注:考试后去CISCO网站注册方法
每考完CISCO一个认证后(考完5至10天)要到CISCO网站注册,网址在成绩单上,是
注册步骤如下:
1.进入上面的网址,如果是第几次使用Tracking System,点击click here设置密码,填上Last name(你的姓,要和成绩单上姓一致)和Registration ID(在成绩单上),填好后点击Create;password,完成密码设置过程.自己设的密码一定要记住呀,接下来的登录还要用!
2.密码设好后,回到了登录界面,输入Test ID(成绩单上的candidate id) 或 Cisco ID和Password,点击Login按钮;
3.在Personal information中有个人信息,须要检查或填写的主要有以下几项:
* E-MAIL ADDRESS:
* Mailing/Correspondence Address:
* Localized Information:(用中文填写)
4.在Certification Agreement中签协议;
5.在test history中有考试记录.
其他的信息可以自己看看,总之Tracking System 使考生与CISCO联系更加方便,为考生更改个人信息和了解CISCO认证提供了一个网上平台.
报名须知:
1.新考生报名手续: 携带有效证件一张 ( 公民身份证 境外人员护照 在伍军人军官证等) --填写考试注册表格,包括(中英文的姓名 地址 考试课程 证件号等个人信息) --缴费注册;
2.老考生报名手续: 携带有效证件一张 (公民身份证 境外人员护照 在伍军人军官证等) --提供VUE考试中心注册的VUE填写注册表 (中英文的姓名、VUE考试课程名及其考试代码、交费凭证号、考试日期、身份证号码、电话号码) --缴费注册;
3.注册交全额考试费;
4.因考生填写考试登记表或传真不清楚而引起的注册错误,一切责任由学员自己负责.
|
|
网上预报名
微信扫描二维码,马上联系商家
1、微信扫描二维码
2、关注“求学快递网”公众号
3、点击给商家留言
当您发现本站有涉及个人的侵权内容时,建议您先尝试与当事人沟通解决问题。 如果您无法联系到当事人,您可通过此渠道提交举报诉求。
根据求学快递网侵权举报规范,您需要向我们提交您的个人信息,其中包括身份证明。如您确认已准备齐全,可点击下方按钮进入诉求提交页。
当您发现本站有涉及企业的侵权内容时,建议您先尝试与当事人沟通解决问题。如果您无法联系到当事人,您可通过此渠道提交举报诉求。
根据求学快递网侵权举报规范,您需要向我们提交您企业和个人的证明材料。如您确认已准备齐全,可点击下方按钮进入诉求提交页。
举报成功!
已经收到您的举报信息,我们会尽快核实并处理,感谢您的信任与帮助~